![DSpace logo](/jspui/image/logo.gif)
Please use this identifier to cite or link to this item:
http://dspace.bits-pilani.ac.in:8080/jspui/xmlui/handle/123456789/11653
Title: | Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys |
Authors: | Sangwan, Kuldip Singh |
Keywords: | Mechanical Engineering Titanium alloys Heat treatment Microstructure Cutting forces Temperature Chips |
Issue Date: | 2012 |
Publisher: | Elsevier |
Abstract: | Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54 M titanium alloy in comparison with Ti64. This paper focuses on the comparison of forces and temperature of the tool during dry orthogonal cuttings of Ti64 and three different heat treated Ti54 M alloys. Forces and temperature are mainly affected by variation in cutting speed and feed, therefore, the depth of cut is maintained constant while cutting speed and feed are varied. Forces and temperature have been measured and chips are analyzed to establish a direct relationship between machinability and the different heat treatment conditions. |
URI: | https://www.sciencedirect.com/science/article/pii/S2212827112000868 http://dspace.bits-pilani.ac.in:8080/xmlui/handle/123456789/11653 |
Appears in Collections: | Department of Mechanical engineering |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.