DSpace logo

  1. BITS Pilani Institutional Repository
  2. BITS Faculty Publications
  3. Department of Mechanical engineering
Please use this identifier to cite or link to this item: http://dspace.bits-pilani.ac.in:8080/jspui/handle/123456789/11653
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSangwan, Kuldip Singh-
dc.date.accessioned2023-08-25T08:49:14Z-
dc.date.available2023-08-25T08:49:14Z-
dc.date.issued2012-
dc.identifier.urihttps://www.sciencedirect.com/science/article/pii/S2212827112000868-
dc.identifier.urihttp://dspace.bits-pilani.ac.in:8080/xmlui/handle/123456789/11653-
dc.description.abstractOrthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54 M titanium alloy in comparison with Ti64. This paper focuses on the comparison of forces and temperature of the tool during dry orthogonal cuttings of Ti64 and three different heat treated Ti54 M alloys. Forces and temperature are mainly affected by variation in cutting speed and feed, therefore, the depth of cut is maintained constant while cutting speed and feed are varied. Forces and temperature have been measured and chips are analyzed to establish a direct relationship between machinability and the different heat treatment conditions.en_US
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.subjectMechanical Engineeringen_US
dc.subjectTitanium alloysen_US
dc.subjectHeat treatmenten_US
dc.subjectMicrostructureen_US
dc.subjectCutting forcesen_US
dc.subjectTemperatureen_US
dc.subjectChipsen_US
dc.titleEffect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloysen_US
dc.typeArticleen_US
Appears in Collections:Department of Mechanical engineering

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.