DSpace logo

  1. BITS Pilani Institutional Repository
  2. BITS Faculty Publications
  3. Department of Electrical and Electronics Engineering
Please use this identifier to cite or link to this item: http://dspace.bits-pilani.ac.in:8080/jspui/xmlui/handle/123456789/14784
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRano, Dinesh-
dc.date.accessioned2024-05-09T09:36:33Z-
dc.date.available2024-05-09T09:36:33Z-
dc.date.issued2016-
dc.identifier.urihttps://ieeexplore.ieee.org/abstract/document/7561201-
dc.identifier.urihttp://dspace.bits-pilani.ac.in:8080/jspui/xmlui/handle/123456789/14784-
dc.description.abstractDesign idea of wearable rectangular patch antenna and its array for MBAN (2.36 - 2.4 GHz) applications are proposed in this paper. Microstrip line with quarter wave transformer is used for feeding purpose. Polyamide lossy (Nylon-6) is used as dielectric substrate whereas the conductive parts i.e. patch and ground plane consists of nickel - copper - nickel coating on the textile substrate. The presence of highly conductive coating on substrate (i.e., surface resistance of 0.1 ohms/m 2 ) aids in the reduction of losses. Five layer model consisting of bottom textile, air gap, skin, fat and bone is considered here. Since the wearable antennas are body worn devices effect of body curvature is also considered by conforming the antennas on cylindrical surface.en_US
dc.language.isoenen_US
dc.publisherIEEEen_US
dc.subjectEEEen_US
dc.subjectMedical Body Area Network (MBAN)en_US
dc.subjectBiomedical Antennaen_US
dc.subjectWearable Antennaen_US
dc.subjectWerable Antnna Arrayen_US
dc.titleDesign and analysis of wearable patch antenna array for MBAN applicationsen_US
dc.typeArticleen_US
Appears in Collections:Department of Electrical and Electronics Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.