Abstract:
In the present work, nonuniform rational B-spline (NURBS) based isogeometric formulation in conjunction with refined higher-order theory is used to investigate the linear buckling, post-buckling, and post-buckled vibration behaviour of initially imperfect skew sandwich plates. The face sheets are functionally graded carbon nanotube-reinforced composite (FGCNTRC), and the core layer is made up of aluminium foam. The effects of three types of CNT distributions (uniform, FGX and FGO) in the face sheets, two types (uniform, symmetric) of porosity distribution functions for the core layer and five types of in-plane compressive loads are examined in the present investigation. The pre-buckling stresses are calculated using static analysis to evaluate accurate, critical loads. The post-buckling paths are traced using the modified Riks method. The accuracy of the present results is ascertained by comparing the results for critical loads and post-buckling paths with those available in the literature. Subsequently, the influence of CNT distribution functions, porosity functions, compressive loads, skew angle and the side-to-thickness ratio is studied on the nonlinear stability and free vibration behaviour of the post-buckled skew sandwich plates. The obtained results highlight that the buckling strength can be improved by increasing the skew angle, increasing the concentration of CNTs towards the surface of the face sheets and by using a metal foam core with nonuniform porosity distribution.