Abstract:
Manufacturing industries are under intense pressure to reduce the energy usage of the machining processes without sacrificing productivity, owing to the fast-rising worldwide market and environmental issues. Variable-power consumption machining processes are highly complex than constant-power consumption machining processes, owing to change in one of the process parameters, i.e. cutting speed during end facing. Besides, integrated modelling and optimization of the variable power consumption machining processes for energy-saving have not received attention, consequently, industry deployment of energy-saving solutions is impeded. To bridge these gaps, in this work, the empirical model developed by the author is integrated for the formulation of a multi-objective optimization model of cutting energy consumption (Ecdry) and average-material removal rate (MRR¯¯¯¯¯¯¯¯¯¯¯¯) expressed by process parameters. First, the optimal parameters are determined for Ecdry and MRR¯¯¯¯¯¯¯¯¯¯¯¯ by mono-objective optimization using the Taguchi technique. Second, Grey relational analysis coupled with the Taguchi method is used to obtain the cumulative performance index of the Ecdry and MRR¯¯¯¯¯¯¯¯¯¯¯¯, and to determine their common optimal parameters, resulting in better-compromised decisions. The MRR¯¯¯¯¯¯¯¯¯¯¯¯ improves to 99.97% with only a 10.08% increase in Ecdry on common optimal parameters compared to optimal parameters with mono optimization of Ecdry. Further, analysis of variance revealed that all considered process parameters have statistical significance, and depth of cut is the most significant parameter followed by spindle speed, feed rate and tool nose radius. It was found that energy consumption values predicted by the integrated modelling and optimization approach are close to the experimental values.