Abstract:
In the past several decades, many destructive and non-destructive testing techniques have been developed to evaluate the characteristics of metal matrix composites (MMCs). This research aims to calculate the mechanical properties of the Al@Al2O3 composites by varying alumina nanoparticles (Al2O3 NPs) content using a non-invasive, position sensing detector (PSD) unit-based optical method. The composite was prepared by a powder metallurgy technique, and its characterization was conducted using SEM and XRD to understand its surface morphology and microstructure. The natural frequency and Young’s modulus of the composite were estimated experimentally. Young’s modulus was calculated using this natural frequency. The proposed study shows that Young’s modulus of the composite increases with an increase in Al2O3 NPs content in the composition, irrespective of the testing method. Along with this, natural frequency also increases with the increase in the Al2O3 NPs content. Evaluated properties were compared with the numerical modeling using COMSOL Multiphysics. The experimental and numerical results are equivalent and within the margin of error. This study illustrates the development of an experimental approach for evaluating the mechanical properties of a composite material. This experimental approach can be used whenever sample dimension and space are constrained to evaluate the mechanical behavior of nanomaterials and nanocomposites.