Abstract:
In this study, extensive research was conducted using computational fluid dynamics (CFD) ANSYS®–FLUENT, with the k–ε turbulence heat transfer module to optimize the rifled-tube heat exchanger through parametric modifications for heat transfer and Goodness factor enhancement. This is based on predicting the performance of various heat transfer surfaces such as rectangular and two opposite right-angled triangular ribs. The objective of this research was to enhance the heat transfer efficiency of a rifled tube with rectangular ribs, a height of 0.775 mm, and helix angles of 30° and 58°. The research findings demonstrated that the heat transfer rate improved owing to the establishment of a secondary helical or swirl flow near the wall region, leading to an enhanced heat transfer. The modification of the rib geometry from rectangular to two opposite right-angled triangles increased the heat transfer by 17%, whereas the pressure drop remained relatively constant at 0.62 mm of rib height. This benefit is directly translated into heat transfer without any change in pressure drop. The values of the friction factor (f), Nusselt number (Nu), and goodness factor are appropriate for the new geometry in relation to the reference geometry. Rifled-tube designers can use CFD heat transfer analysis to optimize the design, reduce the need for physical prototypes, and test similar applications and rib configurations