Abstract:
Today’s society is faced with many upfront challenges such as the energy crisis, water pollution, air pollution, and global warming. The greenhouse gases (GHGs) responsible for global warming include carbon dioxide (CO2), methane (CH4), nitrous oxide (NOx), water vapor (H2O), and fluorinated gases. A fraction of the increased emissions of CO2 in the atmosphere is due to agricultural and municipal solid waste (MSW) management systems. There is a need for a sustainable solution which can degrade the pollutants and provide a technology-based solution. Hence, the present work deals with the custom design of a loop photobioreactor with 34 L of total volume used to handle different inlet CO2 concentrations (0.03%, 5%, and 10% (v/v)). The obtained values of biomass productivity and CO2 fixation rate include 0.185 ± 0.004 g L−1 d−1 and 0.333 ± 0.004 g L−1 d−1, respectively, at 10% (v/v) CO2 concentration and 0.084 ± 0.003 g L−1 d−1 and 0.155 ± 0.003 g L−1 d−1, respectively, at 5% (v/v) CO2 concentration. The biochemical compositions, such as carbohydrate, proteins, and lipid content, were estimated in the algal biomass produced from CO2 mitigation studies. The maximum carbohydrate, proteins, and lipid content were obtained as 20.7 ± 2.4%, 32.2 ± 2.5%, and 42 ± 1.0%, respectively, at 10% (v/v) CO2 concentration. Chlorophyll (Chl) a and b were determined in algal biomass as an algal physiological response. The results obtained in the present study are compared with the previous studies reported in the literature, which indicated the feasibility of the scale-up of the process for the source reduction of CO2 generated from waste management systems without significant change in productivity. The present work emphasizes the cross-disciplinary approach for the development of bio-mitigation of CO2 in the loop photobioreactor.