Abstract:
The present study investigates the effect of Engineered Cementitious Composites (ECC) layer thickness against various reinforcement ratios on the flexural performance of reinforced ECC–concrete composite beams. In total, 20 reinforced composite beams are selected from the literature to predict their flexural response using Finite Element (FE) analysis. In addition to the FE analyses, a detailed analytical study is performed using the strain compatibility procedure to predict the flexural strength of ECC–concrete composite beams. The results from the FE analyses are compared against the experimental results and are found to show a close agreement. Using the validated FE models, detailed parametric studies are conducted to determine the effectiveness of different design parameters such as (a) ECC height replacement for a reinforcement ratio, (b) reinforcement ratio for an ECC height replacement, and (c) adequate reinforcement ratio for effective strengthening. The results of the parametric study show that the use of 0.4 ECC height replacement ratio and 1.70% steel reinforcement ratio exhibit better load-carrying capacity in ECC–concrete composite beams. The effective tensile reinforcement ratio for the ECC–concrete composite beams from minimum to maximum varies in the range of 0.92%–1.85%, respectively. The moment capacities predicted from the section analysis is in good agreement with the experimental and numerical moment capacities.