DSpace Home
→
BITS Faculty Publications
→
Browsing BITS Faculty Publications by Author

Browsing BITS Faculty Publications by Author "Mathew, Nitin Tom"

Now showing items 1-20 of 23

Application and future prospects of additive manufacturing in dermatology

Mathew, Nitin Tom (OUP, 2022-06)

The article discusses the additive manufacturing/3D printing of human skin for advanced applications. Even though this is still in its infancy, additive manufacturing has the potential to revolutionize the field of dermatology ...
Delamination and tool wear in drilling of carbon fabric reinforced epoxy composite laminate

Mathew, Nitin Tom (Elsevier, 2022)

In the present work, drilling experiments were performed on carbon fiber reinforced epoxy composites, fabricated by compression molding. The effect of various process parameters on delamination and tool wear during drilling ...
Drilling of titanium aluminide at different aspect ratio under dry and wet conditions

Mathew, Nitin Tom (Elsevier, 2016-10)

To increase the wide use of intermetallic titanium aluminides for various fields of engineering application, a broad understanding of the machinability of these material is essential. The present work is focussed on the ...
Dry Deep Drilling of Titanium Aluminide

Mathew, Nitin Tom (ASME, 2016-03)

Intermetallic titanium aluminides are recognized as the possibly alloys for high performance aerospace and automobile application. There is an increasing interest of this material due to their extraordinary material ...
Electroplated CBN superabrasive wheel for grinding intermetallic titanium aluminide

Mathew, Nitin Tom (Inder Science, 2019-02)

An experimental investigation is reported on the surface grinding of intermetallic gamma titanium aluminide using electroplated cubic boron nitride grinding wheel. In order to implement the wide acceptability of this ...
Environmentally friendly drilling of intermetallic titanium aluminide at different aspect ratio

Mathew, Nitin Tom (Elsevier, 2017-01)

There is an increasing attempt to implement green manufacturing in almost all fields of engineering. Minimum quantity lubrication is considered as a relevant and promising candidate in promoting environmentally friendly ...
Fabrication of microchannels for microfluidic devices using laser micromachining

Mathew, Nitin Tom (Elsevier, 2023-08)

Micro machining is widely used to create micro features for various applications. Laser micromachining is gaining importance for its flexibility, accuracy, and its ability to process a wide range of materials. The various ...
Fabrication of Ti-6Al-4V thin sheet using wire-EDM and its characterisation

Mathew, Nitin Tom (Inder Science, 2022-02)

An appreciable demand for thin titanium sheets is observed in recent years due to technological development in various sectors. The existing sawing methods are uneconomical to produce high aspect ratio sheets with good ...
Grindability study of intermetallic titanium aluminide using various abrasive wheels

Mathew, Nitin Tom (Elsevier, 2023-07)

Nickel (Ni) and Titanium (Ti) based superalloys satisfy the properties of a material suitable for high-performance applications. Titanium aluminide (γTiAl) is a classic example that finds wide application in aerospace and ...
High-throughput dry drilling of titanium aluminide

Mathew, Nitin Tom (Taylor & Francis, 2016-07)

There is always an increasing interest in and demand for materials with superior properties, particularly in aerospace and automobile industries. Intermetallic titanium aluminides have been recognized as the possible ...
Low-Cost Automation Mechanism for Rotor Press Machine

Mathew, Nitin Tom (Springer, 2022-10)

Pressing rotors on a high-pressure press are an important stage in the manufacturing of rotors for ceiling fans and other appliances. This pressing is done mainly to eliminate bending or distortion defects formed on its ...
Modelling of temperature distribution in the work material during drilling under sustainable environment

Mathew, Nitin Tom (Elsevier, 2018-12)

The knowledge of temperature distribution on the work material is essential to incorporate various sustainable techniques like dry and near dry machining. A new approach of the thermal model during dry drilling process has ...
Multi-objective optimisation in the microturning of cobalt chromium with coated and uncoated tools using the grey relational analysis

Mathew, Nitin Tom (Inder Science, 2015-06)

In this work, the microturning of cobalt chromium has been carried out using coated and uncoated tungsten carbide inserts. The experiments were conducted as per the design of experiments (DoEs) approach using the L9 ...
Multi-Objective Optimization of Microturning Process Parameters Using Particle Swarm Technique

Mathew, Nitin Tom (ASME, 2013-11)

In this work, for the first time an attempt has been made to carry out multi-objective optimization for tool based microturning process parameters using particle swarm optimization (PSO) technique. The input microturning ...
A novel approach to measure kerf-width in wire-electric discharge machining

Mathew, Nitin Tom (Inder Science, 2022-10)

Wire-electric discharge machining is best suitable for manufacturing components from materials having poor machinability. Numerous studies have been carried out on the process optimisation of wire electric discharge machining ...
The potential of microfluidic devices in dermatology

Mathew, Nitin Tom (Wiley, 2021-10)

The potential of microfluidic devices in dermatology. - Abstract - Europe PMC Sign in | Create an account https://orcid.org Europe PMC Menu About Tools Developers Help Contact us Helpdesk Feedback Twitter Blog Tech blog ...
Sustainable milling of Ti-6Al-4 V super alloy using AlCrN and TiAlN coated tools

Mathew, Nitin Tom (Elsevier, 2022)

Majority of the heat energy generated during the metal removal processes disperses with the help of cutting fluids, which possess numerous challenges to environment and mankind. Dry machining with the help of coated tools ...
Sustainable Techniques for Machining Difficult to Cut Materials

Mathew, Nitin Tom (NOVA, 2020-09)

For many years machining is playing a vital role in the global economy. It is a proven fact that a tremendous amount of heat energy developed during machining. The majority of the heat energy generated during the machining ...
Temperature rise in workpiece and cutting tool during drilling of titanium aluminide under sustainable environment

Mathew, Nitin Tom (Taylor & Francis, 2018-05)

This work is focused on the rise in temperature of the workpiece and tool during the drilling of intermetallic titanium aluminide under minimum quantity lubrication (MQL) environment. While drilling under MQL condition ...
Tool condition monitoring in mechanical micromachining

Mathew, Nitin Tom (CRC Press, 2023)

Tool condition monitoring using sensors has become an integral part of machine tools to enhance product quality and productivity. The breakage of the tool causes poor surface quality and dimensional accuracy for machined ...

Now showing items 1-20 of 23

Search DSpace

Advanced Search

Browse

All of DSpace
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Browsing BITS Faculty Publications by Author "Mathew, Nitin Tom"

Browsing BITS Faculty Publications by Author "Mathew, Nitin Tom"

Search DSpace

Browse

All of DSpace

This Community

My Account