BITS Faculty Publications: Recent submissions

Now showing items 41-60 of 11461

Investigating into casting LMPA (low-melting-point alloy) with 3D-printed mould and inspecting quality using 3D scanning

Kala, Prateek (Emerald, 2024-07)

Three-dimensional (3D) casting means using additive manufacturing (AM) techniques to print the mould for casting the cast tool. The printed mould, however, should be checked for its dimensional accuracy. 3D scanning can ...
3D printed hernia mesh implant: a conformability study

Kala, Prateek (Open Exploration Publishing., 2024-09)

This study aims to explore the sensing capabilities of polyvinylidene fluoride-hydroxyapatite-chitosan (PVDF-HAP-CS) composite-based hernia mesh implants (of conformal/planar design), followed by in-vitro analysis for ...
In chamber calibration and performance evaluation of air quality low-cost sensors

Kala, Prateek (Elsevier, 2024-12)

Assessing individual exposure to PM2.5 (particulate matter of aerodynamic diameter lesser than 2.5 μm) requires precise monitoring of PM2.5 concentrations at specific geographical and temporal scales. This demand is met ...
Performance evaluation of developing electrical discharge machining tools through 3D-printed mould using selective laser sintering and expanding its applications in developing free-form tools

Kala, Prateek (Sage, 2024-12)

In the current study, an attempt has been made to find the optimum parameters for electroplating three-dimensional (3D) casted low melting point alloys. The electroplated profile is used as a tool in an electric discharge ...
Feasibility study of fusible alloy-based copper electroplated EDM tool for biomedical applications

Kala, Prateek (Springer, 2024-10)

The current study demonstrates the idea of making customised EDM tools using low melting point alloys for possible application in surface modification of biomedical implants. The mould is 3D-printed through a selective ...
On the design and fabrication of polyvinylidene fluoride-based sensors to detect recurrence of diaphragmatic hernia

Kala, Prateek (Sage, 2024-12)

Polyvinylidene fluoride (PVDF) bio-sensors have gained potential interest in remote health monitoring of patients using Internet of Things (IoT) technologies. But hitherto, limited studies have reported on the fabrication ...
On 3D printed polyvinylidene fluoride composite-based diaphragmatic hernia sensors

Kala, Prateek (Sage, 2024-09)

Diaphragmatic hernia (DH) recurrence is a commonly reported disorder among bovines. Recently, studies have been reported using wireless devices (like ultrasonic and radio-frequency (RF) based pressure sensors) to detect ...
On PLA-based conformal sensors for detecting the recurrence of diaphragmatic hernia

Kala, Prateek (Springer Nature, 2025-06)

Hernia mesh sensor-based solutions have recently been developed for bovines’ diaphragmatic hernia (DH). But hitherto, little has been reported on the performance of such sensors in detecting the effect of increased abdominal ...
Development of keyless biometric authenticated vehicles ignition system

Srinivasan, P. (Elsevier, 2023)

The vehicles are started or ignited using manual keys or sensor based keys. In two wheelers after placing keys the bike is started using either button or kicking method. The other vehicles are started using key cranking ...
IoT based air quality measurement and alert system for steel, material and copper processing industries

Srinivasan, P. (Elsevier, 2023)

The air quality of industry gets affected due to the industrial processing like heating of metals such as steel, copper. The burning and processing alters the level of NitrogenDioxide (NO2), Carbon Monoxide (CO), Carbon ...
Implementation of battery degradation on lithiumion batteries using PYNQ-FPGA

Srinivasan, P. (IEEE, 2024)

Predicting the remaining usable life (RUL) of a lithium-ion battery properly is vital for appropriate maintenance and overall health evaluation, which is particularly pertinent in the burgeoning electric vehicle industry, ...
Numerical simulation and experimental investigation on Phase Change Materials based energy storage system for cooling the water in process industries towards water conservation and environmental sustainability

Srinivasan, P. (Elsevier, 2024-04)

Water conservation is one of the significant concerns in the industrial sector in cooling processes. Water is lost predominantly in the cooling towers by evaporation, drift, and blowdown. A new Phase Change Material (PCM) ...
Smart city air quality management with IOT and Bayesian optimization for pollution monitoring

Srinivasan, P. (IEEE, 2025-02)

The rapid urbanization happening around the globe is having a huge effect on the environment. Cities in the poor world are particularly vulnerable to air pollution. In light of this issue, several nations are mandating ...
Bearing signal classification using dynamic time warping

Choudhury, Madhurjya Dev (Springer, 2025-03)

Bearing is a critical machine element whose fault-free health status is crucial to the reliable operation of the machine. In recent times, machine learning-based approaches of training models on huge amount of measured ...
Domain generalization using pseudo triplet network learning for vibration signal-based fault diagnosis

Choudhury, Madhurjya Dev (IEEE, 2025-02)

Domain generalization (DG) based intelligent fault diagnosis has developed rapidly in recent years owing to the need for applying trained neural networks to unseen domains. However, models trained using DG often suffer ...
An adaptive source-free unsupervised domain adaptation method for mechanical fault detection

Choudhury, Madhurjya Dev (Elsevier, 2025-04)

Cross-machine fault detection is crucial due to the challenges of data labeling. While domain adaptation methods facilitate diagnosis across rotating machines, they often require data sharing, which is impractical due to ...
Using MCDM techniques for talent identification and management in sports

Dasgupta, Mani Sankar (Springer, 2025-03)

Talent identification in sports is a process of identifying individuals with the potential to excel in a particular sport or athletic activity. It entails evaluating a range of psychological, technical, tactical, and ...
Performance analysis of an R744 supermarket refrigeration system integrated with an organic rankine cycle

Dasgupta, Mani Sankar (MDPI, 2023-11)

The energy and economic performance of a transcritical R744 booster supermarket refrigeration system with and without parallel compression and integrated with an organic Rankine cycle (ORC) was investigated. The results ...
Investigation of economizer with screw compressor to provide subcooling and enhance cop in various natural refrigerant-based cascade freezer

Dasgupta, Mani Sankar (Springer, 2024-09)

This study examines two configurations of a cascade refrigeration system using natural refrigerants-R744 in the low-temperature circuit (LTC) and one from this list of R717, R290, R1270, or R600a in the high-temperature ...
Investigation on temperature heterogeneity for angled placing of crates in a cold storage, during precooling

Dasgupta, Mani Sankar (Springer, 2025-05)

Precooling conditions in cold storage are essential for preserving horticultural produce and reducing food and moisture loss. Inside a cold storage, the chilling rate and temperature heterogeneity are determined by the ...

Now showing items 41-60 of 11461

Search DSpace

Advanced Search

Browse

All of DSpace
This Community
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

BITS Faculty Publications: Recent submissions

Search DSpace

Browse

All of DSpace

This Community

My Account