DSpace Home
→
BITS Faculty Publications
→
Department of Mechanical engineering
→
Browsing Department of Mechanical engineering by Issue Date

Browsing Department of Mechanical engineering by Issue Date

Now showing items 1-20 of 1314

Performance of Farmer Producer Organisations in Rajasthan: An Empirical Assessment

Pandey, Ranjan; Sharma, Satyendra Kumar; Routroy, Srikanta (Routledge, 202)

India is predominantly an agrarian economy. According to the recent Economic Survey (2021–22), agriculture and allied sectors continue to be the mainstay of the Indian economy as it is the largest employer of the working ...
The effects of inlet fluid flow nonuniformity on thermal performance and pressure drops in crossflow plate-fin compact heat exchangers

Ranganayakulu, Chennu (Elsevier, 1996-10)

An analysis of a crossflow plate-fin compact heat exchanger, accounting for the effects of two-dimensional nonuniform inlet fluid flow distribution on both hot and cold fluid sides, is carried out using a finite element ...
The effects of longitudinal heat conduction in compact plate-fin and tube-fin heat exchangers using a finite element method

Ranganayakulu, Chennu (Elsevier, 1997-04)

An analysis of the crossflow plate-fin, crossflow tube-fin, counterflow plate-fin and parallel flow plate-fin compact heat exchangers accounting for the effect of ‘longitudinal heat conduction’ through the exchanger wall ...
The combined effects of inlet fluid flow and temperature nonuniformity in cross flow plate-fin compact heat exchanger using finite element method

Ranganayakulu, Chennu (Springer, 1997-06)

An analysis of a crossflow plate-fin heat exchanger accouning for the combined effects of inlet fluid flow nonuniformity and temperature nonuniformity on both hot and cold fluid sides is carried out using a Finite Element ...
The combined effects of wall longitudinal heat conduction, inlet fluid flow nonuniformity and temperature nonuniformity in compact tube–fin heat exchangers: a finite element method

Ranganayakulu, Chennu (Elsevier, 1999-01)

A finite element analysis of a crossflow tube–fin compact heat exchanger is presented. The analysis takes into account the combined effects of one-dimensional longitudinal heat conduction through the exchanger wall and ...
The combined effects of wall longitudinal heat conduction, inlet fluid flow nonuniformity and temperature nonuniformity in compact tube–fin heat exchangers: a finite element method

Ranganayakulu, Chennu (Elsevier, 1999-01)

A finite element analysis of a crossflow tube–fin compact heat exchanger is presented. The analysis takes into account the combined effects of one-dimensional longitudinal heat conduction through the exchanger wall and ...
The combined effects of longitudinal heat conduction, flow nonuniformity and temperature nonuniformity in crossflow plate-fin heat exchangers

Ranganayakulu, Chennu (Elsevier, 1999-07)

An analysis of a crossflow plate-fin compact heat exchanger, accounting for the combined effects of two-dimensional longitudinal heat conduction through the exchanger wall and nonuniform inlet fluid flow and temperature ...
The combined effects of wall longitudinal heat conduction and inlet fluid flow maldistribution in crossflow plate-fin heat exchangers

Ranganayakulu, Chennu (Springer, 2000-05)

An analysis of a crossflow plate-fin compact heat exchanger, accounting for the combined effect of two-dimensional longitudinal heat conduction through the exchanger wall and nonuniform inlet fluid flow distribution on ...
Fuzzy controller development from information granules for a heat exchanger

Dasgupta, Mani Sankar (NISCAIR, 2000-07)

This paper discusses the experimental results of on-line fuzzy control of a heat exchanger unit. Fuzzy controllers are a class of model independent controllers. which use common sense logic, expressible in linguistic form ...
The Effects of Inlet Temperature Nonuniformity in a Crossflow Plate-fin Heat Exchanger

Ranganayakulu, Chennu (IHTC, 2002)

A finite element analysis of a cross-flow plate-fin compact heat exchanger is presented. The analysis takes into account the effects of non-uniform inlet fluid temperature distributions on both hot and cold fluid sides. ...
Computer aided design and manufacture of streamlined extrusion dies

Srinivasan, P. (Elsevier, 2003-07)

Extrusion is one of the widely used metal forming processes. The extrusion process is carried out conventionally using a shear faced die, but shear faced dies have many practical problems such as a dead metal zone, more ...
Performance value analysis for the justification of world-class manufacturing systems

Sangwan, Kuldip Singh (World Scientific, 2004)

World-class manufacturing systems (WCMS) has attracted the attention of industries all over the world. The perceptible impact of WCMS lies in attaining the far reaching world-class standards. Attempts have been made to ...
A review of wind energy developments in India

Soni, Manoj Kumar (Inder Science, 2004)

Climate change, dwindling reserves of fossil fuels and shortage of electricity have prompted the government to give an impetus to renewable energy sources. Wind energy, with an average growth rate of 30%, is the fastest ...
Bubble formation with pool boiling on tubes with or without basic surface modifications for enhancement

Ranganayakulu, Chennu (Elsevier, 2004-04)

Bubble formation is investigated on a single, horizontal copper tube (D=25.4 mm) before and after applying surface modifications in the form of macrocavities with comparatively simple shapes (size: 200 × 100 μm on the tube ...
Multi-attribute decision models for justification of cellular manufacturing systems

Sangwan, Kuldip Singh (Inder Science, 2004-11)

There is a general challenge offered to the field of engineering economics by the introduction of advanced manufacturing systems. Typically, the traditional approaches do not account for the significant intangible benefits ...
Differential evolution algorithm for supply chain inventory planning

Routroy, Srikanta (Emerald, 2005)

This paper discusses the inventory planning of a supply chain, which consists of a manufacturer, distributor and retailer.
A designer workbench with real-time capture and reuse of information on product evolution and rationale

Kota, Srinivas (ICED, 2005)

Product Life Cycle Management promises management of all intellectual assets generated for all life cycle phases of a product [1]. This includes supporting capture and structure of information generated about an evolving ...
Design and development of streamlined extrusion dies a Bezier curve approach

Srinivasan, P. (Elsevier, 2005-04)

Conventional shear dies used for extrusion of metals suffer from many problems. Attempts are made to improve the die design in many ways. Streamlined extrusion dies are considered to be better than shear dies. Streamlined ...
Heat transfer from horizontal tubes in pool boiling: influence of three-dimensional heat conduction in the wall of the evaporator tube—a finite element analysis

Ranganayakulu, Chennu (Springer, 2005-10)

In pool boiling, the electrically heated tube releases the energy non-uniformly to the liquid, due to different surface roughness and flowing liquid. The heat transfer coefficient therefore varies with axial and azimuthal ...
Decision framework for selection of facilities location in competitive supply chain

Routroy, Srikanta (World Scientific, 2006)

Supply chain management (SCM) is an area that has recently received a great deal of attention. In today's markets, no business can be successful without mastering the issues, problems and possibilities in managing competitive ...

Now showing items 1-20 of 1314

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Browsing Department of Mechanical engineering by Issue Date

Browsing Department of Mechanical engineering by Issue Date

Search DSpace

Browse

All of DSpace

This Collection

My Account