Recently added

Magnetohydrodynamic ferrofluid flow and entropy generation in a trapezoidal thermal system with a half-elliptical heater

Bhattacharyya, Suvanjan (Springer, 2025-10)

This study numerically investigates magnetohydrodynamic (MHD) nanofluid flow and entropy production in a trapezoidal-shaped thermal system with a centrally positioned half-elliptical heater. Fe3O4/water nanofluid is utilized ...

Exergy and thermal performance analysis of solar air heater with novel hybrid tape vortex generators for rural applications

Bhattacharyya, Suvanjan (Elsevier, 2025-11)

Its sustainability, affordability, and environmental compatibility are helping solar energy to attract more worldwide interest. Driving industrial progress and helping economic growth in many areas depend much on it. Among ...

Impact of magnetic fields on magnetic nanofluid heat transfer in enhanced mini-channels for high-performance cooling

Bhattacharyya, Suvanjan (Elsevier, 2025-12)

This study computationally compares various minichannel configurations to improve heat transfer efficiency and lower battery surface temperatures, ensuring safe operation and extended lifespan. Utilizing CuO/water, Fe3O4/ ...

Conventional methods for enhancing heat transfer relevant to heat exchangers

Bhattacharyya, Suvanjan (CRC Press, 2025)

The enhancement of heat transfer is an essential component of thermal engineering. It plays a key role in enhancing the efficiency and performance of heat exchangers across a wide range of industries, including manufacturing ...

Microchannel heat exchangers

Bhattacharyya, Suvanjan (CRC Press, 2025)

This chapter deals with the nuances of microchannel heat exchangers and the various methods employed to conduct a novel study of the said topic. The chapter deals with the fundamental concepts needed to understand fluid ...

Machine learning-assisted wire arc additive manufacturing and heat input effect on mechanical and corrosion behaviour of 316 L stainless steels

Sinhmar, Sunil (Elsevier, 2024-10)

Predicting the track forming factor or height-to-width ratio (H/W) in wire arc additive manufacturing is crucial for optimal path planning, heat distribution, structural integrity, distortion control, process efficiency, ...

Investigation of corrosion and electrical resistance in laser welded Al-Cu joints for EV batteries

Sinhmar, Sunil (Elsevier, 2024-12)

This study investigates the correlation among the microstructure, electrochemical, and electrical properties of laser-welded Alsingle bondCu joints used in battery applications. Aluminium and copper thin sheets were laser ...

Effect of weld profile geometry on dissimilar laser welded joints for battery applications

Sinhmar, Sunil (Springer, 2025-10)

A transition from fossil fuels to greener technologies like batteries is essential for a sustainable future. This study explores the impact of weld profile geometry on laser-welded aluminum–copper (Al–Cu) dissimilar lap ...

Development and optimization of pearl millet waste biocomposite ceiling tiles: a waste management approach

Routroy, Srikanta (Springer Nature, 2025-07)

The present study aims to develop and optimize sustainable biocomposite ceiling tiles by partially replacing gypsum with pearl millet waste, combined with Waste Wheat Flour (WWF) and waste paper. It aims to provide a ...

A multiple regression model to analyze the impact of endogenous factors on pearl millet and stover yield in India

Routroy, Srikanta; Sharma, Satyendra Kumar (Emerald, 2025-08)

The purpose of the study is to explore the impact of endogenous (farmer-controlled) factors on both pearl millet and stover yield. The study uses descriptive and inferential statistics to analyze farmer-controlled factors ...

Influence of electric potential boundary condition on the electrospraying process

Rao, Venkatesh K.P.; Yadav, Shyam Sunder (Elsevier, 2025-08)

In the current work, we perform three dimensional numerical simulations of the electrospraying process. Our aim is to investigate the effect of electric potential boundary condition on the electrospraying process of a ...

A three-dimensional open-source solver for incompressible viscoelastic two-component flows

Rao, Venkatesh K.P.; Yadav, Shyam Sunder (ASME, 2025-10)

In this study, we unveil a three-dimensional flow solver designed to simulate viscoelastic two-phase flows using the Oldroyd-B formulation. Acknowledging the challenges that researchers encounter in this dynamic field, we ...

Experimental and numerical investigation of nanoparticle assisted PCM-based battery thermal management system

Verma, Saket; Bhattacharyya, Suvanjan (Springer, 2024-04)

Li-ion batteries generate a large amount of heat in the electric vehicles. The poor heat dissipation from the battery causes temperature rise and affects its performance and life. If the battery temperature is not controlled, ...

Experimental and numerical investigation for optimization of a hybrid battery thermal management system based on phase change material and air convection

Verma, Saket (ASME, 2024-12)

This work presents the design and optimization of a phase change material (PCM)-based hybrid battery thermal management system (HBTMS). In the first stage, experiments are performed to measure the battery cell temperatures ...

Numerical investigation of phase change material-based hybrid battery thermal management system for mass optimization

Verma, Saket (Taylor & Francis, 2023-12)

In this work, a hybrid battery thermal management system using active cooling and Phase Change Material (PCM) has been studied. The additional weight of PCM poses design challenges, and hence its optimization is required. ...

Dynamic modelling and control strategy of a temperature-driven metal hydride cooling system for buildings

Verma, Saket (Elsevier, 2025-03)

A temperature-driven coupled metal hydride (MH) based thermal energy storage (TES) system can allow to shave and shift the peak energy demand in buildings. The high energy density and long-term (seasonal) energy storage ...

Synergistic effect of binary surfactant mixture for enhanced boiling heat transfer

Verma, Saket (Elsevier, 2025-07)

Surfactants are ubiquitous in our everyday life ranging from household applications to various industrial applications. One such critical application is boiling, wherein, aqueous solution of surfactant is used to enhance ...

Analysis of grid interfaced power converter for uninterrupted hydrogen production using PEM electrolyzer

Verma, Saket (Elsevier, 2025-07)

Phase-shift full bridge (PSFB) converter is widely used for high-power applications in battery charging, and data centers. However, it also has a strong application for the electrolyzer system to produce hydrogen. But, in ...

Progress in design and development of battery thermal management system for electric vehicles

Verma, Saket (Springer, 2025-08)

Reversible electrochemical batteries having reasonable cyclic charging and discharging capabilities are commonly employed in portable applications. The battery technology has improved on various aspects such as high specific ...

Prospects of open cathode fuel cells in future powertrains

Verma, Saket (Springer, 2025-08)

Fuel cell technology shows great potential as an eco-friendly alternative to conventional internal combustion engines. Conventional internal combustion engines only manage efficiencies of 20–30%, whereas fuel cells can ...

Recently added

Department of Mechanical engineering: Recent submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account