• Hybrid advanced oxidation processes for treatment of wastewater from the pharmaceutical industry 

  Mandal, Pubali (CRC Press, 2024)

  Ever increasing health issues and rapid development of the healthcare sector causes discharge of pharmaceuticals in different water matrices. Conventional treatment processes are unable to remove the compounds from wastewater. ...
• Analgesics in wastewater matrix: a comprehensive review on occurrence, toxicity, and sustainability assessment of biological, tertiary, and hybrid treatment processes 

  Mandal, Pubali (Elsevier, 2025-06)

  Over the past few decades, increased consumption of pharmaceuticals has led to the prevalence of the pharmaceuticals and their metabolites in various wastewater matrices. Amongst, analgesics are one of the most consumed ...
• Experimental determination of creep coefficients for sintered flyash lightweight aggregate based concrete and verification with creep models 

  Singh, Shamsher Bahadur; Barai, Sudhir Kumar (MIM Research Group, 2024)

  The experimental creep coefficient has been determined for two concrete strengths of about 40 MPa and 60 MPa using sintered flyash lightweight aggregate and granite aggregate in creep rig with capacity of 1500kN as per ...
• Mechanical properties and fracture behavior of concrete made with sintered fly ash lightweight coarse aggregate and electric arc furnace slag as fine aggregate 

  Singh, Shamsher Bahadur; Barai, Sudhir Kumar (JRESM, 2024-08)

  The present work evaluates mechanical properties and fracture behaviour of concrete made with combination of sintered flyash lightweight coarse aggregate (SFA) and electric arc furnace (EAF) slag as fine aggregate. The ...
• Strengthening of masonry columns with precast ECC system 

  Singh, Shamsher Bahadur (Techno Press, 2024-12)

  This study deals with the strengthening of rectangular masonry columns with precast Engineered Cementitious Composites (ECC) system to enhance the axial compressive strength of columns. Masonry columns of 230x230 mm ...
• FRP based earthquake retrofitting of RC columns 

  Singh, Shamsher Bahadur (Springer, 2024-04)

  Fiber reinforced polymer (FRP) materials are being used for the last two decades as reinforcement in new concrete structures and prestressing tendons in pretressed concrete structures. In addition, they are being used at ...
• Design of concrete beams reinforced with FRP bars 

  Singh, Shamsher Bahadur (Springer, 2024-04)

  Design of RC beams with longitudinal reinforcement made of steel bars has adopted the philosophy of Under-Reinforced Design. But, Concrete Beams with FRP longitudinal bars need a reconsideration of this philosophy. The ...
• Influence of fiber dimensions on bridging performance of polyvinyl alcohol fiber-reinforced cementitious composite (PVA-FRCC) 

  Singh, Shamsher Bahadur (MDPI, 2024-08)

  This study investigates the influence of fiber dimensions on the bridging performance of polyvinyl alcohol fiber-reinforced cementitious composite (PVA-FRCC) through an experimental and analytical program. Bending tests, ...
• Experimental investigation of physical and mechanical characteristics of pultruded/hand lay-up gfrp thin-walled structural sections and gfrp pultruded ribbed rebars 

  Singh, Shamsher Bahadur (Springer, 2024-11)

  The paper presents the findings of an experimental study conducted to determine the physical and mechanical properties of glass fiber-reinforced polymer (GFRP) I-shaped structural profiles and surface ribbed round rebars. ...
• Life cycle assessment of artificial sintered flyash lightweight aggregate produced in India using OFF gas and coal based thermal power 

  Singh, Shamsher Bahadur; Barai, Sudhir Kumar (Springer, 2025-02)

  The potential environmental impacts associated with production of sintered flyash lightweight aggregate (SFA) needs comparison with natural aggregates (NA) which can directly help in the selection of sustainable materials. ...
• Laboratory manual for civil engineering 

  Gupta, Rajiv (CBS Publishers, 2019)
• Construction planning and technology 

  Gupta, Rajiv (CBS Publishers, 2013)

  The book js a supplementary to the course in which all the building materials components of a building (doors windows finish staircase etc.) are taught. The author feels that these components can be understood if one goes ...
• Passive solar design for energy efficiency in buildings in composite climate 

  Gupta, Rajiv (IOP, 2019)

  Renewable energy sources offer an unlimited supply of energy. Solar energy can be utilized to supplement energy needs of a building either passively or actively. It is feasible to reduce consumption of energy usage for ...
• A top-down spatial scenario approach for identifying the locations of rainwater harvesting sites in an urban region 

  Gupta, Rajiv (Springer, 2024-10)

  Alternative water sources are necessary in developing nations because surface water is not always accessible, and groundwater is depleted. In such situations, rainwater harvesting is considered a promising sustainable water ...
• Comparative assessment of LSTM approaches for enhanced prediction of rainfall climatology with minimum uncertainty 

  Gupta, Rajiv (Inder Science, 2025)

  Forecasting precipitation is highly challenging for scientific modellers due to the complexity and uncertainty of atmospheric data and weather prediction models. To investigate the hydrological alternations such as rising ...
• Shear wave velocity estimation of pilani soil using ultrasonics 

  Kumar, Kamalesh (Revolution Code Blue, 2025)

  In order to evaluate dynamic response of soils, shear wave velocity of soils is widely used. This is small-strain parameter. These dynamic responses are seismic site response, machine foundation vibration and liquefaction ...
• Structural health monitoring based on aggregation-induced emission active mechanoluminescence organic material 

  Bhunia, Dipendu (AIJR, 2025-03)

  The current research aims to design a stress sensor using a recently synthesized organic molecule that exhibits a mechanoluminescence (ML) property. The experimental set-up is established by analyzing different application ...
• Bio-chelation for sustainable heavy metal remediation in municipal solid waste compost: a critical review of chelation technologies 

  Singhal, Anupam; Srinivas, Rallapalli (Springer, 2025-04)

  Municipal solid waste (MSW) compost is a promising solution for sustainable urban waste management, widely used as a soil amendment and for carbon sequestration. However, heavy metals in MSW compost pose risks to ecosystems, ...
• Assessment of different curing methods on marble dust concrete 

  Srivastava, Anshuman (Springer, 2025-03)

  This research deals with significance of marble dust containing concrete by using different curing methods on it. Marble dust is used as a partial replacement of cement ranging from 0 to 15% by cement weights were considered ...
• Marble dust as a sustainable cementitious material: investigating the synergistic effects of curing conditions 

  Srivastava, Anshuman (Taylor & Francis, 2025-04)

  This study examines the effect of seven different curing regimes (normal water, marine environment, ambient, jute bag, polythene bag, accelerated water, and carbonation curing) on the mechanical properties and durability ...

View more