Abstract:
Superhydrophobic surfaces are essential for applications such as self-cleaning and corrosion resistance. This study explores the fabrication of superhydrophobic surfaces on Al-6061 alloy using dry micro electrical discharge milling (µEDM milling) and investigates the effects of gaseous dielectrics on wettability under atmospheric conditions. Surfaces machined in an oxygen environment showed a surface area roughness (Sa) of 4.68 µm, 73.3 % higher than those machined in argon, attributed to enhanced metal oxide formation. Energy Dispersive X-ray Analysis (EDAX) indicated a significantly elevated O/Al atomic ratio of 0.80 for oxygen-machined samples, which was 73.9 % greater than argon-machined samples, suggesting the presence of hydrophilic compounds such as AlO(OH) and Al2O3. Additionally, X-ray Photoelectron Spectroscopy (XPS) revealed that Al2O3 peaks on oxygen-machined surfaces were broadened and shifted to higher binding energies, correlating with decreased contact angles and increased surface hydrophilicity. These results suggest that using oxygen as a dielectric in the electrical discharge machining (EDM) process promotes oxide layer formation, resulting in hydrophilic characteristics, while machining in argon encourages organic adsorption and greater hydrophobicity. The findings of this research provide insights that can inform future efforts to tailor surface properties for advancements in aerospace, automotive, and biomedical engineering applications.