dc.contributor.author |
Barai, Sudhir Kumar |
|
dc.date.accessioned |
2021-11-11T11:27:22Z |
|
dc.date.available |
2021-11-11T11:27:22Z |
|
dc.date.issued |
2011-01 |
|
dc.identifier.uri |
https://www.sciencedirect.com/science/article/pii/S0950061810003041#! |
|
dc.identifier.uri |
http://dspace.bits-pilani.ac.in:8080/xmlui/handle/123456789/3546 |
|
dc.description.abstract |
This paper presents the experimental results of recycled aggregate concrete (RAC) beams prepared with different amount of recycled coarse aggregate (RCA) subjected to low velocity impact. The recycled coarse aggregates are obtained from a demolished RCC culvert. Four concrete mixes with 0%, 25%, 50% and 100% RCA respectively are prepared. With each mix three beam specimens of size 1.15 × 0.1 × 0.15 m are prepared and tested under drop weight impact load. The behavior of the RAC beams are studied in terms of acceleration, strains and support reaction histories under impact load in addition to the physical and mechanical characteristics of RCA and RAC. It is observed that 25% RCA does not influence the strength of concrete. In addition, it is found that for a given impact energy (the energy imparted by the hammer per blow) the reactions and strains of RAC with 50% and 100% RCA are significantly lower and higher respectively than those of normal concrete and RAC with 25% RCA. |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
Elsiever |
en_US |
dc.subject |
Civil Engineering |
en_US |
dc.subject |
Recycled coarse aggregate (RCA) |
en_US |
dc.subject |
Recycled aggregate concrete (RAC) |
en_US |
dc.subject |
Low velocity impact |
en_US |
dc.subject |
Tensile strain |
en_US |
dc.subject |
Compressive strength |
en_US |
dc.title |
Behaviour of recycled aggregate concrete under drop weight impact load |
en_US |
dc.type |
Article |
en_US |