Department of Civil Engineering

Permanent URI for this collectionhttp://localhost:4000/handle/123456789/1927

Browse

Filters

2018 - 20202

Settings

Author: search.filters.author.Mandal, PubaliSubject: search.filters.subject.Electrochemical oxidation

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Role of inorganic anions on the performance of landfill leachate treatment by electrochemical oxidation using graphite/PbO2 electrode
    (Elsevier, 2020-02) Mandal, Pubali
    The influences of sulfate, chloride, nitrate, and bicarbonate ions on the electrochemical treatment performances of landfill leachate have been investigated. The concentrations of SO42−, Cl−, NO3− ions, and bicarbonate alkalinity of landfill leachate were 252 mg L-1, 1244 ± 22.3 mg L-1, 12 mg L-1, and 1750 ± 40.8 mg L-1 as CaCO3 without any external salt addition. The concentrations of anions were analyzed after 2 h of electrochemical oxidation to understand any conversion of externally added anions. Chemical oxygen demand (COD), dissolved organic carbon (DOC), and ammonia-nitrogen removal efficiencies after 2 h of electrolysis were 35.1 ± 2.3 %, 25.6 ± 2.9 %, and 97.6 ± 0.7 % respectively. Although no effect was observed for COD and DOC removal, increasing sulfate ion adversely affected NH3-N removal efficiency; the removal percentage decreased to 87.7 ± 0.5 % for 6082 mg L-1 of SO42− containing leachate. Addition of chloride improved the overall system performance. Obtained COD and DOC removal efficiencies were 67.2 ± 1.5 % and 55.8 ± 2.1 % for Cl− concentration of 4361 mg L-1 in leachate. Very low NH3-N removal (60 ± 2.1 %) for 1483 mg L-1 of nitrate containing leachate was obtained in this study due to the regeneration of ammonia by cathodic reduction of nitrate. Nitrate formation was observed as part of reactions for ammonia removal; for instance, the nitrate concentration increased from 12 mg L-1 to 39.3 ± 4 mg L-1 after electrolysis. For the leachate treatment containing 6000 mg L-1 of externally added HCO3−, the COD and DOC removal efficiencies decreased to 19.6 ± 0.6 % and 17.8 ± 1.1 %, but the more adverse effect was observed for NH3-N removal efficiency which was only 7.4 ± 1.8 %.
  • No Thumbnail Available
    Item
    A novel approach towards multivariate optimization of graphite/PbO2 anode synthesis conditions: Insight into its enhanced oxidation ability and physicochemical characteristics
    (Elsevier, 2018-08) Mandal, Pubali
    Electrochemical oxidation has drawn great interest for its potential application in degrading persistent organic pollutants (POPs) through electrogenerated hydroxyl radical at the surface of anode. This study aims at the preparation of an inexpensive graphite/PbO2 anode. For enhancing oxidation performance, preparation process parameters viz. Pb(NO3)2 concentration, potential, and time of electrodeposition of a graphite/PbO2 anode, electrodeposited from acidic electrolyte bath, were optimized targeting a POP, 2,4-dinitrophenol removal. The changes in morphological properties of the developed oxide films were analyzed using scanning electron microscopy (SEM) which manifested significant impacts of selected anode preparation process parameters. Furthermore, PbO2 film prepared at optimum conditions were characterized using SEM, atomic force microscopy (AFM), energy dispersive X-ray spectroscope (ESD) elemental mapping, and X-ray diffraction (XRD) for thorough investigation of crystal structures, elemental distribution over surface, and phase of PbO2. Angular structures in both SEM and AFM analysis and appearance of β-PbO2 characteristic peaks in XRD analysis confirmed formation of electrocatalytically active phase of PbO2. For further enhancing the oxidation ability, influencing experimental parameters viz. current intensity, pH, and NaCl concentration were optimized. After 2 h of electrolysis at optimum experimental conditions, COD and total organic carbon removal efficiency of 93.6 ± 0.63% and 71.7 ± 1.52% were obtained respectively.