BITS Faculty Publications
Permanent URI for this communityhttp://localhost:4000/handle/123456789/1867
Browse
3 results
Search Results
Item Vortex dynamics around a fluctuating beam(AIP, 2023-05) Aneesh, A.M.Fluid Structure Interaction (FSI) analysis for fluctuating beam in viscous fluids has been carried out for the preliminary design of propeller-less underwater drones. The Immersed Boundary Method has been used to address a large variety of Fluid Structure Interaction problems such as insect flight, locomotion of fishes and batoid pieces etc.IB2d is an open-source MATLAB code developed by Battista, which can be used for solving two-dimensional Fluid Structure Interaction problems using the Immersed Boundary Method. The settings of IB2d solver have been verified by reproducing a flapping beam problem. The parameters for this problem have been changed to study the flow generated around a beam tethered at both ends and subjected to a perturbation of the beam in static fluid. The beam has been modelled as a setof Lagrangian points for a given length and stiffness value and the fluid around the beam is modelled as a Eulerian regionof certain viscosity and density. The beam has been perturbed from its equilibrium position by an ellipsoidal arc and the dynamics of vortices around the beams are analyzed both qualitatively and quantitatively. The simulations have been repeated by varying viscosities of the Eulerian region, varying length of the beam and varying stiffness values betweenthe Lagrangian points. The parametric study shows that the magnitude of vorticity around the beam reduces with increasein viscosity and stiffness It is also found that for the same curvature, the motion speed reduces with reduction in the beamlength.Item Thermal-hydraulic characteristics and performance of 3D straight channel based printed circuit heat exchanger(Elsevier, 2016-04) Aneesh, A.M.CFD study is done to propose an efficient PCHE (Printed Circuit Heat Exchanger) model; used as a recuperator in International Thermonuclear Experimental Reactor (ITER). 3D steady-state conjugate heat-transfer simulations are done with helium as a working fluid and alloy 617 as the solid substrate. Effect of variation of thermo-physical properties, operating conditions and three different design modifications are studied. Thermal hydraulic performance is found better for single as compared to double banking and is the same for aligned as compared to the staggered arrangement of the hot and cold channels. PCHE models with hemispherical dimples are found to give better thermal hydraulic performance. The performance is presented for the variation of the heat transfer density (for a PCHE model) and the pressure drop (in the hot and cold channel). Various types of flow patterns are presented to analyze the thermal-hydraulic characteristics − leading to the heat transfer enhancement by the dimples.Item Effects of wavy channel configurations on thermal-hydraulic characteristics of Printed Circuit Heat Exchanger (PCHE)(Elsevier, 2018-03) Aneesh, A.M.Printed Circuit Heat Exchanger (PCHE) is a widely chosen plate type compact heat exchanger for high pressure applications. The present work mainly focuses on two high pressure applications; firstly, Helium Cooling System (HCS) of Test Blanket Module (TBM) in International Thermonuclear Experimental Reactor (ITER) and secondly, Intermediate Heat exchangers (IHX) in Very High Temperature Reactors (VHTR). In this work, a reduced numerical model for a single banked PCHE core working in He-He counter flow circuit has been numerically modelled and verified against the results available in the literature. The same model is then extended for studying the effect of three wavy-channel configurations viz. triangular, sinusoidal and trapezoidal in a single banked PCHE core made of Alloy-617. The nature of local flow and heat transfer in the periodic channels has been studied by visualizing the vortex core using iso-normalized helicity surfaces. Thereafter, the thermo-hydraulic performances of these models are compared with straight channel PCHEs. Among the various models studied, the trapezoidal PCHE model is found to offer highest heat transfer with the largest pressure drop compared to sinusoidal, triangular and straight channel based PCHE models. A maximum of 41% increase in the heat transfer rate is predicted for the trapezoidal wavy channel compared to the straight channel PCHEs, for the tested operating conditions. For the sinusoidal and triangular wavy-channel PCHE configurations, the corresponding heat transfer advantages are predicted to be 33% and 28% respectively. The optimal thermo-hydraulic performance is also assessed, considering the thermal performance factor (TPF) obtained for all the three channels. The highest values of TPF are predicted for trapezoidal wavy channels (3.5) which is followed by sinusoidal (2.5) and triangular (1.5) wavy channels.