BITS Faculty Publications

Permanent URI for this communityhttp://localhost:4000/handle/123456789/1867

Browse

Filters

2024 - 20252

Settings

Author: search.filters.author.Etika, Krishna ChitanyaSubject: search.filters.subject.Copper nanowires

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Hydrothermal synthesis of conductive copper nanowires: effect of oleylamine and dextrose concentrations
    (RSC, 2025-11) Etika, Krishna Chitanya
    One-dimensional (1-D) metallic nanoparticles (i.e., nanowires, nanorods) exhibit unique properties and are useful in a variety of applications. 1-D copper nanowires (CuNWs) exhibit excellent electrical conductivity making them an economical alternative in applications that typically employ silver or gold nanowires. In this study, CuNWs were synthesized via an environmentally benign and scalable hydrothermal synthesis method using CuCl2 (CuP) as a copper precursor. Oleylamine (OAm) and dextrose (D) were employed as capping and reducing agents, respectively. The focus of this work was to investigate the influence of varying CuP[thin space (1/6-em)]:[thin space (1/6-em)]OAm and CuP[thin space (1/6-em)]:[thin space (1/6-em)]D molar ratios during synthesis on the nanowire growth, morphology, and electrical conductivity. A series of synthesis trials were conducted by only varying CuP[thin space (1/6-em)]:[thin space (1/6-em)]OAm or CuP[thin space (1/6-em)]:[thin space (1/6-em)]D molar ratios, while keeping all other reaction conditions constant. Morphological analysis of the synthesized products suggests that both OAm and D are essential for the formation of CuNWs. A synthesis conducted at a 1[thin space (1/6-em)]:[thin space (1/6-em)]3.75[thin space (1/6-em)]:[thin space (1/6-em)]1.1 CuP[thin space (1/6-em)]:[thin space (1/6-em)]OAm[thin space (1/6-em)]:[thin space (1/6-em)]D molar ratio produced nanowires with average diameter of 96 nm, while higher OAm concentration resulted in CuNWs with larger diameters. X-ray diffraction analysis confirmed the crystalline nature of the synthesized CuNWs, with diffraction peaks corresponding well to those of FCC copper. The capping of CuNWs with OAm was confirmed through FTIR spectroscopy. Thermogravimetric (TGA) studies on CuNWs show that OAm content in CuNWs increases with increasing CuP[thin space (1/6-em)]:[thin space (1/6-em)]OAm molar ratio during synthesis. The electrical conductivity of CuNW pellets was found to decrease with increasing CuP[thin space (1/6-em)]:[thin space (1/6-em)]OAM molar ratio during synthesis. The highest conductivity of 1.38 × 105 S cm−1 was exhibited in the sample made using 1[thin space (1/6-em)]:[thin space (1/6-em)]3.75[thin space (1/6-em)]:[thin space (1/6-em)]1.1 CuP[thin space (1/6-em)]:[thin space (1/6-em)]OAm[thin space (1/6-em)]:[thin space (1/6-em)]D molar ratio. Furthermore, holding CuNWs pellets under ambient conditions for 60 days did not affect their electrical conductivity.
  • No Thumbnail Available
    Item
    BST@Copper Nanowire/Epoxy composites with excellent microwave absorption in the X-band
    (Elsevier, 2024-09) Kumar, A. V. Praveen; Etika, Krishna Chitanya
    In this work, hybrid epoxy nanocomposites containing varying loading of copper nanowires (CuNW), Ba0.7Sr0.3TiO3 (BST), and BST@CuNW hybrid nanoparticles were prepared and analyzed for their microwave absorption characteristics. The nanoparticles used in this study were prepared using a facile co-precipitation and hydrothermal methodology. The synthesized nanoparticles were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD) for their morphology and phase determination. While the XRD results confirmed the presence of BST and CuNW, the SEM micrographs obtained on the hybrid BST@CuNW nanoparticles show BST anchored on the CuNW surfaces. A series of epoxy composites containing varying loading of synthesized nanoparticles were prepared and characterized for their microwave properties, such as complex permittivity, shielding effectiveness, and power coefficients. The results indicate that nanocomposites containing BST@CuNW hybrids exhibited enhanced dielectric loss and more significant microwave power absorption compared to samples with equivalent CuNW and/or BST loading. The best composite sample, i.e., a one-millimeter-thick epoxy containing 10:15 (wt/wt) CuNW: BST hybrid nanoparticles with an estimated density of 1.49 g/cc attenuated 99.1 % of incident microwave power and exhibited a shielding effectiveness value of 21.2 dB in the X-band (8–12 GHz) of the microwave frequency spectrum. These lightweight polymer composites with high microwave absorption in the X-band are useful for military and civilian applications.